ELEC ENG 2017 - Circuits and Systems
North Terrace Campus - Semester 1 - 2025
-
General Course Information
Course Details
Course Code ELEC ENG 2017 Course Circuits and Systems Coordinating Unit Electrical and Electronic Engineering Term Semester 1 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 8 hours per week Available for Study Abroad and Exchange N Prerequisites ELEC ENG 1100 or ELEC ENG 1100UAC or ELEC ENG 1101 or ELEC ENG 1101UAC Incompatible ELEC ENG 2011, ELEC ENG 2007 Restrictions Bachelor of Engineering (Honours) (Electrical & Electronic) Assessment Tutorials, Tests, Practicals, Exam Course Staff
Course Coordinator: Associate Professor Brian Ng
Course coordinator: A/Prof Brian NgCourse Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Apply systematic methods to the analysis of linear systems, in particular electric circuits, using both time and frequency domain techniques 2 Compute signal spectrum and understand the power/energy spectral density interpretation, for periodic and aperiodic signals commonly encountered in electrical engineering 3 Determine frequency response and transfer functions of linear systems, including circuits with multiple passive components, using analytical, graphical or computational methods 4 Design passive analogue filters 5 Use a circuit simulation package to model circuits with passive and active components such as resistors, capacitors, diodes, and transistors
The above course learning outcomes are aligned with the Engineers 最新糖心Vlog . The course develops the following EA Elements of Competency to levels of introductory (A), intermediate (B), advanced (C):
1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6 B C C — — A B B — — A B B B B B 最新糖心Vlog Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
最新糖心Vlog Graduate Attribute Course Learning Outcome(s) Attribute 1: Deep discipline knowledge and intellectual breadth
Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.
1-5 Attribute 2: Creative and critical thinking, and problem solving
Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.
1-5 Attribute 3: Teamwork and communication skills
Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.
5 Attribute 4: Professionalism and leadership readiness
Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.
5 Attribute 7: Digital capabilities
Graduates are well prepared for living, learning and working in a digital society.
1-5 -
Learning Resources
Required Resources
All required material will be provided on MyUni.Recommended Resources
Useful reference books:
- Hayt, Kemmerly & Durbin, Engineering Circuit Analysis, McGraw-Hill Education, 2018, ISBN: 9781260084887
- Oppenheim, Willsky & Hamid, Signals and Systems, Pearson (multiple editions, all suitable)
Online Learning
This course uses MyUni exclusively for providing electronic resources, such as course notes, assignment papers, sample solutions, discussion boards, strongly recommended that the students make intensive use of these resources for this course.
Link to MyUni login page: -
Learning & Teaching Activities
Learning & Teaching Modes
This course uses in-person workshops and practicals to facilitate learning. Classes will take the form of two 2-hour workshops each week, combining short lecture-style presentation of materials with in-class exercises designed to build knowledge. Practicals will be run up to 6 weeks throughout the semester, with one 3-hour session per week.
Material will be provided on MyUni. Communications will take place through announcements, interactive discussions on Piazza and emails. During the semester, questions will be answered within 1 business day.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
There will be up to 69 contact hours throughout the course. Students are expected to spend a further 85 hours of private study, including completing assessments and revision.Learning Activities Summary
Teaching and Learning Activity Frequency Course Learning Outcomes Workshops 2 per week 1-5 Practicals 6 in total 1-5
Specific Course Requirements
There are no specific course requirements. -
Assessment
The 最新糖心Vlog's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Assessment Task Task Type Due (week)* Weighting Hurdle Criteria Learning Outcome Online Quizzes Formative TBD 10% Summative Tests Summative TBD 15% Homework Formative & Summative TBD 15% Practical Formative & Summative TBD 20% min 50% Examination Summative Exam period 40% min 40%
* The specific due date for each assessment task will be available on MyUni.
This assessment breakdown complies with the 最新糖心Vlog's Assessment for Coursework Programs Policy.Assessment Related Requirements
A hurdle requirement is defined by the 最新糖心Vlog's Assessment for Coursework Programs policy as "...an assessment task mandating a minimum level of performance as a condition of passing the course.
In this course the examination has a hurdle requirement. It is necessary to achieve at least 40% in the exam to successfully complete the course. If the exam hurdle requirement is not achieved, the total course mark will be limited to a maximum of 49.
If a student fails to meet a hurdle requirement and is assigned a total mark for the course in the range of 45-49, then the student is entitled to an offer of additional assessment of some type. The type of assessment is to be decided by the School Assessment Review Committee when determining final results. The student’s final total mark will be entered at no more than 49% and the offer of an additional assessment will be specified e.g. US01. Once the additional assessment has been completed, this mark will be included in the calculation of the total mark for the course and the better of the two results will apply. Note however that the maximum final result for a course in which a student has sat an additional assessment will be a “50 Pass”.
If a student is unable to meet a hurdle requirement related to an assessment piece (maybe throughout semester or at semester’s end) due to medical or compassionate circumstances beyond their control, then the student is entitled to an offer of replacement assessment of some type. An interim result of RP will be entered for the student, and the student will be notified of the offer of a replacement assessment. Once the replacement assessment has been completed, the result of that assessment will be included in the calculation of the total mark for the course.
Assessment Detail
- Online quizzes: submission on MyUni.
- Tests: in person, open book tests, submission at the end of tests.
- Homework: electronic submission via MyUni; detailed instructions to be provided with each assignment. Usually a single pdf file but can require accompanying files. Turnitin may be used to detect collusion or plagiarism.
- Practicals: undertake laboratory activities and write up their results for submission.
- Exam: in person, 2 hour exam, submission at the conclusion of exam.
Extensions for assessment tasks can be granted. For details, consult the 最新糖心Vlog's Assessment for Coursework Programs policy.
Late submissions on assignments will be penalised at a rate of 20% per day, unless you have applied for and received an extension as described in the Assessment for Coursework Programs policy.
Submission
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The 最新糖心Vlog places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the 最新糖心Vlog to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
This is the second time this course is delivered. The practical will be updated/modified to improve student's learning experiences. -
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 最新糖心Vlog of Adelaide is committed to regular reviews of the courses and programs it offers to students. The 最新糖心Vlog of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
