MECH ENG 7072 - Micro-Controller Programming
North Terrace Campus - Semester 2 - 2017
-
General Course Information
Course Details
Course Code MECH ENG 7072 Course Micro-Controller Programming Coordinating Unit School of Mechanical Engineering Term Semester 2 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Incompatible MECH ENG 3032 Assumed Knowledge C programming e.g. MECH ENG 1103 Assessment assignments 50%, final exam 50% Course Staff
Course Coordinator: Associate Professor Steven Grainger
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Analyse the needs of mechatronic applications and design appropriate micro-controller based solutions; 2 Apply the hardware units within a modern micro-controller; 3 Create micro-controller based applications through appropriate use of software tools; 4 Interface external devices to a micro-controller; and 5 Recognise the need to undertake lifelong learning.
The above course learning outcomes are aligned with the Engineers 最新糖心Vlog .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6
最新糖心Vlog Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
最新糖心Vlog Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-4 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
1, 3, 4 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
1, 3, 4 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1, 3, 4 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
1 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
1, 5 -
Learning Resources
Required Resources
Lecture Notes provided
Recommended Resources
Qing Li, Caroline Yao, Real-Time Concepts for Embedded Systems, CMP Books, New York, 2003, ISBN 1-57820-124-1
Thomas Bräunl, Embedded Robotics, Mobile Robot Design and Applications with Embedded Systems, Springer, Berlin, 2003, ISBN 3-540-03436-6
Online Learning
Jonathan W. Valvano, Developing Embedded Software in C Using ICC11/ICC12/Metrowerks, , [last accessed: 10/01/2006] -
Learning & Teaching Activities
Learning & Teaching Modes
The course takes a flexible approach to teaching and learning with material delivered, concepts explored and skills developed using a range of techniques. A flipped model is utilised with interactive sessions used for presentation of material, exploration of concepts and discussion of directed reading. A series of diagnostic quizzes is used to establish existing knowledge and the assimilation of taught concepts.
Laboratories are centred upon project based learning with case studies used to provide hands-on experience.
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Indicative workload is 13 hours per week
Activity Hours Interactive lecture sessions 18 Online activities 6 Laboratories 24 Self study 46 Directed reading 12 Assignments 50 Learning Activities Summary
Introduction [1 week]- Definition of embedded systems
- Application examples
- Common micro-controller tasks
- Typical hardware units within a micro-controller
- Software development cycle
- Programming languages for micro-controllers (C, C++, Java)
- Target Platform: Wytec Dragon12
- Software IDE: Keil C166, Metrowerks CodeWarrior, GNU gcc
The build process, fundamentals [1 week]- Compiler, assembler, linker
- Compiler and linker options
- Keil C166 projects
- Source level debugging using a micro-controller simulator
- Debugging using a target monitor
- Macro definitions, configuration registers and stack frames
- Memory models and memory maps
- Memory type specifiers
- Object classes and storage class
Micro-controller interfacing [2 weeks]- Address, data and control busses
- Serial, parallel, DMA techniques
- Interrupts and polling
- Timing
- Digital I/O
- A/D converter
- Serial communications
- PWM unit
- Object classes and storage class
The build process, advanced concepts [2 weeks]- Sections, modules, programs
- The linker
- Interpreting the assembler listing
- Interpreting the linker map file
- Near data and far data
- Library files
- Development utilities
- Objects file formats: ELF, COFF, DWARF-1/2, S-Records, Intel HEX
- Optimisation
Interfacing to Mechatronic Devices [3 weeks]- Intelligent instrumentation
- Transducers
- Signal processing
- Motion control
- Power circuitry
Embedded control applications [3 weeks]- Servo-motor control
- Stepper motor control
- Real-time data logger (menu driven, RS-232, communications, adjustable sample rate)
Specific Course Requirements
N/A
-
Assessment
The 最新糖心Vlog's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
* The specific due date for each assessment task will be available on MyUni.Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Laboratory participation 10 Individual Summative Weeks 1-6 1. 2. 3. 4. Assignment 1 Mini project 10 Individual Summative Week 5 1. 2. 3. Assignment 2 Mini project 15 Group Summative Week 9 1. 2. 3. 4. Assignment 3 Research project 15 Individual Summative Week 12 1. 5. Examination 50 Individual Summative 1. 2. 3. 4. Total 100
This assessment breakdown complies with the 最新糖心Vlog's Assessment for Coursework Programs Policy.
Assessment Related Requirements
N/A
Assessment Detail
Assignment 1 10%
Requires the design and implementation of software for the sensing and control of mechatronics devices. Submission of an engineering report and developed software.Assignment 2 10%
Requires the design and implementation of interface hardware and software for the sensing and control of mechatronics devices. Student demonstration and submission of hardware and developed software.
Assignment 3 10%
Requires the design and implementation of software for the sensing and control of mechatronics devices. Submission of an engineering report and developed software.
Assignment 4 10%
Requires the design and implementation of interface hardware and software for the sensing and control of mechatronics devices. Student demonstration and submission of hardware and developed software.Lab Sessions 10%
Students are required to undertake the weekly lab sessions.
Examination 50%
2hr open book examination.In addition there will be a series of formative quizzes.
Submission
Fully commented source code and associated assignment documentation must be submitted through myUni. Late submissions are subject to a penalty of 10% per working day. Re-submissions are not allowed except under extenuating circumstances. Assignments will normally be returned within 2 working weeks.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The 最新糖心Vlog places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the 最新糖心Vlog to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 最新糖心Vlog of Adelaide is committed to regular reviews of the courses and programs it offers to students. The 最新糖心Vlog of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
