最新糖心Vlog

ELEC ENG 7066 - Power System Dynamics

North Terrace Campus - Semester 1 - 2015

Swing equation and synchronously rotating reference frame; Single Machine Infinite Bus System; Transient Stability (Equal Area Criteria); Computation tools (interpolation, differentiation, integration, collocation etc.); Modelling and dynamics of the synchronous machine; Excitation systems and automatic voltage regulators; Turbines and speed governors; Modelling and dynamics of the induction machine; Numerical simulation of power system dynamics; Small-disturbance angle stability; Transient (angle) stability; Voltage stability.

  • General Course Information
    Course Details
    Course Code ELEC ENG 7066
    Course Power System Dynamics
    Coordinating Unit School of Electrical & Electronic Engineering
    Term Semester 1
    Level Postgraduate Coursework
    Location/s North Terrace Campus
    Units 3
    Contact Up to 4 hours per week
    Available for Study Abroad and Exchange Y
    Assumed Knowledge ELEC ENG 3021, ELEC ENG 3016 or equivalent
    Assessment quizzes, assignments, research project
    Course Staff

    Course Coordinator: Dr Rastko Zivanovic

    Course Timetable

    The full timetable of all activities for this course can be accessed from .

  • Learning Outcomes
    Course Learning Outcomes

    No information currently available.

    最新糖心Vlog Graduate Attributes

    No information currently available.

  • Learning Resources
    Required Resources
    There are no required textbooks. A set of course notes, practice problems and other supporting materials will be delivered via email as well as available for downloading from the course web site.
    Recommended Resources
    P.M Anderson and A.A. Fouad, Power System Control and Stability, IEEE Press

    T. van Cutsem, and C. Vournas, Voltage Stability of Electrical Power Systems
    Online Learning
    Course notes, tutorial problems and solutions, laboratory exercises and practice problems will all be available for downloading from MyUni.
  • Learning & Teaching Activities
    Learning & Teaching Modes
    This course relies on lectures as the primary delivery mechanism for the material. Tutorials supplement the lectures by providing exercises and example problems to enhance the understanding obtained through lectures. Practicals are used to provide hands-on experience for students to reinforce the theoretical concepts encountered in lectures. Continuous assessment activities provide the formative assessment opportunities for students to gauge their progress and understanding.
    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    Activity Contact hours Workload hours
    Lecture 32 lectures 32 68
    Tutorials tutorials 6 12
    Practicals 11 32
    Homeworks 14
    On-line quizzes
    In-class tests 3 20
    TOTALS 52 146
    Learning Activities Summary
    Activity Week Topic
    Lecture & Tutorial & Homework 1 Introduction
    Lecture & Tutorial & Homework 2 Swing equation and synchronously rotating reference frame
    Lecture & Tutorial & Homework 2, 3 Single Machine Infinite Bus System
    Transient Stability / Equal Area Criteria
    Lecture & Tutorial & Homework 3 PSD Computation (interpolation, differentiation, integration, collocation)
    Lecture & Tutorial & Homework 3, 4 PSD Computation (interpolation, differentiation, integration, collocation)
    Linearised SMIB including damping
    Lecture & Tutorial 4, 5 Nonlinear SMIB and Functional Newton iterations
    4th order synchronous machine model
    Practical Assignment 1 5 Transient Stability Study
    Quiz 1 6 PSD introductory topics
    Lecture & Tutorial & Homework 8, 9 Modelling of Synchronous Machines and Associated Controls
    Lecture & Tutorial & Homework 9 Estimation of machine parameters
    Practical Assignment 2 9 MATLAB simulation of SMIB system
    Lecture & Tutorial 10, 11 Load modelling
    Bifurcation analysis
    Voltage Stability
    Quiz 2 12 PSD Advanced topics
  • Assessment

    The 最新糖心Vlog's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Assessment activity Type Weighting Due date Learning outcome addressed
    In-class quizzes Summative 46% Weeks 6 and 12 All
    Practicals Summative 54% Weeks 5 and 9 All
    Assessment Related Requirements
    A hurdle requirement is defined by the 最新糖心Vlog's as "...an assessment task mandating a minimum level of performance as a condition of passing the course.

    If a student fails to meet a hurdle requirement (normally no less than 40%),and is assigned a total mark for the course in the range of 45-49, then the student is entitled to an offer of additional assessment of some type. The type of assessment is to be decided by the School Assessment Review Committee when determining final results. The student’s final total mark will be entered at no more than 49% and the offer of an additional assessment will be specified eg. US01. Once the additional assessment has been completed, this mark will be included in the calculation of the total mark for the course and the better of the two results will apply. Note however that the maximum final result for a course in which a student has sat an additional assessment will be a “50 Pass”.

    If a student is unable to meet a hurdle requirement related to an assessment piece (may be throughout semester or at semester’s end) due to medical or compassionate circumstances beyond their control, then the student is entitled to an offer of replacement assessment of some type. An interim result of RP will be entered for the student, and the student will be notified of the offer of a replacement assessment. Once the replacement assessment has been completed, the result of that assessment will be included in the calculation of the total mark for the course.
    Assessment Detail
    Details of individual assessment tasks will be provided during the semester.
    Submission
    All written submissions to formative assessment activities are to be submitted to designate boxes within the School of Electrical & Electronic Engineering by 3:00pm on the specified dated and must be accompanied by a signed cover sheet. Copies of blank cover sheets are available from the School office in Ingkarni Wardli 3.26.
    No late submissions will be accepted . All formative and summative assessments will have a two week turn-around time for provision of feedback to students.

    Full details can be found at the School policies website:
     
    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through .

  • Student Feedback

    The 最新糖心Vlog places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the 最新糖心Vlog to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 最新糖心Vlog of Adelaide is committed to regular reviews of the courses and programs it offers to students. The 最新糖心Vlog of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.