MECH ENG 2019 - Dynamics & Control I
North Terrace Campus - Semester 2 - 2021
-
General Course Information
Course Details
Course Code MECH ENG 2019 Course Dynamics & Control I Coordinating Unit School of Mechanical Engineering Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Assumed Knowledge MECH ENG 1007, APP MTH 2201 & ELEC ENG 1009 Restrictions Available to all programs offered by the School of Mechanical Engineering. Assessment Assignments, laboratory experiments, final exam Course Staff
Course Coordinator: Rini Akmeliawati
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Explain the principles of machine dynamics and mobility in different coordinate systems; 2 Apply vector analysis to planar mechanisms to quantify the displacement, velocity and acceleration of the mechanism components; 3 Use kinetics of mechanisms for determination of forces and moments; 4 Use kinematic analysis and design of gears and simple, compound, reverted and epicyclical gear trains; 5 Explain the concept of inertial forces and apply the principles of static and dynamic balancing for rotating and reciprocating systems; 6 Explain the concept of feedback in control systems; 7 Generate the transfer functions and block diagrams of any dynamical systems; 8 Analyse the stability and performance of any linear feedback control systems; 9 Design linear controllers using root locus technique, and 10 Use software tools to design, analyze and evaluate control systems in the time domain.
The above course learning outcomes are aligned with the Engineers 最新糖心Vlog .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 2.1 2.2 2.3 2.4 3.2 3.3 3.4
最新糖心Vlog Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
最新糖心Vlog Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-10 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
2-10 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
1, 9 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1, 9, 10 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
1, 9 -
Learning Resources
Required Resources
Course notes – these are essential and required.
Recommended Resources
1. Nise, N., Control Systems Engineering, 8th Ed, Wiley, or Dorf, R.C. and Bishop, R.H., Modern Control Systems, Prentice Hall.
2. Mabie, H.H. and Reinholtz, C.F., 1987, Mechanisms and Dynamics of Machinery, Fourth Edition, Wiley and Sons.
Online Learning
Lectures complemented by online resources available on MyUni, including lecture recordings. -
Learning & Teaching Activities
Learning & Teaching Modes
Lectures supported by problem-solving tutorials and practicals developing material covered in lectures.
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The required time commitment is 48 hours attendance at lectures, 48 hours of revising course material, 48 hours completing assignments, and 40 hours preparing and completing practical reports.
Learning Activities Summary
-
Velocity and acceleration in mechanisms/linkages
-
Kinematics and dynamics of gears
-
Gear trains
-
Force analysis of plane mechanisms
-
Balancing of rotating masses
-
Balancing of reciprocating masses
-
Introduction to the concept of feedback in control systems
-
Mathematical modelling and Laplace Transforms
-
Transfer Function and Block Diagrams
-
Time Response
-
Performance Specifications
-
System Stability
-
Root locus Techniques
-
Compensator Design via Root Locus
Specific Course Requirements
None.
-
-
Assessment
The 最新糖心Vlog's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
All assessment tasks are summative. There are two equally weighted components of the course. For the Machine Dynamics component there are 3 assignments worth a total of 30% of the assessment and an exam worth 60%. In addition, there is a practical report worth 10%. For the Automatic Control component there are 2 assignments worth a total of 20% of the assessment, online quizzes worth 10% and an exam worth 60%. In addition, there are 2 practical reports worth a total of 10%. All assignments are due by 5pm on the due date. All students are required to attend lab and practical sessions, and must obtain at least 35% for the lab/prac components.
Assessment Related Requirements
Note that the laboratory experiments are compulsory and it is a requirement to pass the laboratory experiments to pass the course.Assessment Detail
No information currently available.
Submission
All assignments must be submitted as instructed, either in the digital drop box in MyUni or as a hard copy placed in the labelled box on level 2 of Engineering South Building. Any assignments submitted as a hard copy must be accompanied by an assessment cover sheet available from Room S116 or near the assignment submission area. Late assignments will be penalised 10% per day. Extensions for assignments will only be given in exceptional circumstances and a case for this with supporting documentation can be made in writing after a lecture or via email to the lecturer. Hard copy assignments will be assessed and returned in 3 weeks of the due date. There will be no opportunities for re-submission of work of unacceptable standard. Due to the large size of the class feedback on assignments will be limited to in-class discussion resulting from questions from students.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The 最新糖心Vlog places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the 最新糖心Vlog to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 最新糖心Vlog of Adelaide is committed to regular reviews of the courses and programs it offers to students. The 最新糖心Vlog of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
